Linkedin
Linkedin

Entrance Tile

Rain Control / Dust Control

Click on image for more information or to order a sample.

TOLI Dust Control Carpet Tile

DC-1100

Brushes the dirt off shoe soles and keeps it in dust pockets.

Large dust pockets trap more dirt

The opening among piles of the carpet tile is called a dust pocket, and the dirt will drop from shoe soles and accumulate in this dust pocket. Because of the large dust pockets, DC-1100 can absorb a larger amount of dust and sand compared to ordinary carpet tiles.

<Test method>

Dust type: Powder for JIS test-type 1

  1. Big amount of dust is pushed into the pile, and excessive amount remaining over the pile is removed with the use of a brush or the like.
  2. The carpet tile is weighed when the brushed surface looks clean, and calculate the increased weight as the dust pocket capacity.

The pile structure designed for easy maintenance

DC-1100 has a large dust pocket, and the ample opening will make the vacuum maintenance much easier compared to ordinary carpet tiles. And the dust pocket is kept well by durable piles to help continuous performance of maintenance.

<Test method>

Dust type: Powder for JIS test-type 1

  1. According to JIS L 4406, rotate caster chair tester 2000 turns, to have carpet piles flattened. (Such carpet is assumed equal to the condition after approx. 250,000 persons’ walk.)
  2. Rub 100g /㎡ of dust into the carpet with a brush, and reciprocate the Upright Vacuum Cleaner 20 times in each direction of back-and-forth and right-and-left.
  3. Measure the weight of vacuumed dust, and then calculate the vacuum rate.

Removes 90% of dirt within 6 feet

Removes 90% of dirt within 6 feet

Dust pocket prevents dirt and sand from overflowing the surface of carpet tile. For removing 90% dirt from the shoe soles, approx. 5 m walk is necessary on ordinary carpet tile, while only 2 m walk suffices on DC-1100.

<Test method>

Dust type: Powder for JIS test-type 1

  1. Fill the tray with specific dust and flatten the surface.
  2. Carpet tiles are laid in one line of 5m length, then place at the end a mat to wipe off the remaining dirt.
  3. After attaching dust to the shoe sole, walk on every carpet tile one step each at a time, then completely remove remaining dust on the shoe sole with a mat.
  4. After repeating this operation 100 times, the dust removal rate of each carpet tile was calculated in comparison with the total dust removed.

Highly durable and long-lasting functions

DC-1100 is more resistant against flattening than ordinary carpet tiles, because of solution dyed nylon being tangled with thick nylon yarns. As a result, the capacity of the dust pocket is maintained and the dust removal function continues for a long time.

<Test method>

Dust type: Powder for JIS test-type 1

  1. According to JIS L 4406, rotate caster chair tester 2000 turns, to have carpet piles flattened. (Such carpet is assumed equal to the condition after approx. 250,000 persons’ walk.)
  2. Big amount of dust is pushed into the pile, and excessive amount remaining over the pile is removed with the use of a brush or the like.
  3. The carpet tile is weighed when the brushed surface looks clean, and calculate the increased weight as the dust pocket capacity.

TOLI Rain Control Carpet Tile

RC-1200

Unique pile technology absorbs water from shoe soles and prevents it from being brought indoors.

Removes 93% of moisture within 6 feet

RC-1200 piles are mixed with fine threads that absorbs moisture easily. 93% of moisture is absorbed from shoe soles by about 2m walking on, which is impossible by ordinary carpet tiles.

<Test method>

  1. Step in the water-filled tray for certain period of time and step in the empty tray twice.
  2. Take one step each on 12 test specimens of 500 mm square tile.
  3. Wipe off any remaining moisture from shoe soles.
  4. Taking above 1-3 procedure as 1 cycle, the amount of water absorbed
    in each carpet tile is figured out from the weight change after 50
    cycles.

Hydrophilic technology removes dirt easily while absorbing moisture quickly

Hydrophilic coating of RC-1200 yarn helps to remove dirt easily and absorb moisture quickly. Therefore, water penetrates between the fiber surface and the dirty material, which makes it easier to remove the dirt after adhesion to fibers. In addition, it has excellent capacity to quickly absorb water.

Absorbed moisture is securely retained

Absorbed moisture is securely retained ​

RC-1200 is designed with a high-density pile that resists flattening by stepping on. Unlike ordinary water-absorbent mats, it will retain the absorbed moisture and will not allow the moisture to transfer indoors

<Test method>

  1. Measure the weight of a 10cm square sample of ordinary water-absorbent mat and RC-1200 after immersion in water and kept horizontally for a certain period of time.
  2. Measure the weight of each specimen after the same weight (9.6kg) loaded for a certain period of time.
  3. Water retention rate was calculated.

Easy-to-Dry Structure

The 1st backing of RC-1200 is highly effective in spreading absorbed water horizontally. By enlarging the superficial area where water is exposed to the air, it will be dried up more quickly.

<Test method>

50ml water is dropped on each test piece of 500 mm square size. After 24 hours’ preservation under the specified condition (20C, 60%RH), measure the weight to check the evaporated moisture from each tile.

RCDC1
DC1104_shoes (1)
DC1101_RC1201_GX8603_2 (1)
DC1104_RC1201_foot (1)
DC1101_RC1201_GX8603 (1)
RC1201_shoes (1)

View Our Installation Gallery

View Product Line Gallery
View application/industry gallery
X